
A range of 3 small inline fans suitable for use as in/out fans or for use with ducting up to 1.5m in length.
The 100mm version is ideal for our grow tents and fits neatly into the smaller stock to draw air up through the tent from the passive vents at the base.
The 120mm takes 125mm ducting.
Supplied with 2m power lead.
Please note we would not recommend using with air cooled lights as the heat from the lamp is too great.
| Fresh Inline Fan 100mm |
| Fresh Inline Fan 125mm |
| Fresh Inline Fan 150mm |
If you are looking for an affordable complete odour control kit then this is for you.
The kit consists of:
RVK Extractor Fan
Fresh Carbon Filter
Aluminium Ducting 5 Meters
2 x Quick Release Clamps
RVK Fan Brackets
| 100mm Fresh Air Kit 175m3/hr |
| 125mm Fresh Air Kit 350m3/hr |
| 150mm Fresh Air Kit 480m3/hr |
| 200mm Frsh Air Kit 760m3/hr |
| 250mm Fresh Air Kit 1020m3/hr |
| 315mm Fresh Air Kit 1300m3/hr |
The RVK range of fans made in Germany are quiet and powerful. They are also ideal for connecting to our range of carbon filters.
| 100mm RVK |
| 125mm RVK |
| 150mm RVK |
| 200mm RVK |
| 250mm RVK |
| 315mm RVK |
This unique product represents a real step forwards in automatic temperature control. Unlike other controllers that simply shunt fans from idle to full speed after temperature is exceeded, the Twin Controller automatically calculates the exact running speed for your fans to maintain the temperature you set.
| Twin Fan Controller 4.5A |
45 Degree bend Assists with air flow.
| 100mm 45 Degree Bend |
| 125mm 45 Degree Bend |
| 150mm 45 Degree Bend |
| 200mm 45 Degree Bend |
| 250mm 45 Degree Bend |
| 315mm 45 Degree Bend |
Hydroponics systems require a steady flow of air to carry away heat, moisture and waste gases. Our fans are very quiet and mounted in MDF acoustic boxes and are among the quietest that you can buy.
| Fan 1450 Acoustic |
| Fan 1500 Acoustic |
| Fan 2500 Acoustic |
| Fan 3250 Acoustic |
| Fan 4250 Acoustic |
An extremely flexible reinforced aluminium foil flexible ducting. Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix. Fire resistant.
Sold by the meter.
| 100mm Duct |
| 125mm Duct |
| 150mm Duct |
| 200mm Duct |
| 250mm Duct |
| 315mm Duct |
Equal T Pieces are used to split runs of ducting.
| Equal T Piece 100mm |
| Equal T Piece 125mm |
| Equal T Piece 150mm |
| Equal T Piece 200mm |
| Equal T Piece 250mm |
| Equal T Piece 315mm |
"Y" pieces ensure an even flow when you need to use one fan to draw evenly from two areas.
| 100mm Equal Y Piece |
| 125mm Equal Y Piece |
| 150mm Equal Y Piece |
| 200mm Equal Y Piece |
| 250mm Equal Y Piece |
Flange Pieces are used at the end of your ducting run to securely attach to an outside wall.
| Flange Piece 100mm |
| Flange Piece 125mm |
| Flange Piece 150mm |
| Flange Piece 200mm |
| Flange Piece 250mm |
| Flange Piece 315mm |
The In line filter box attaches to your in take ducting and filters out pests,pollen and dust this will help cut down pest invasions.
The filter box can also be used between your carbon filter and air cooled lights to help keep your lights clean from carbon dust.
| 100mm Inline Filter Box |
| 125mm Inline Filter Box |
| 150mm Inline Filter Box |
| 200mm Inline Filter Box |
This filter box is used with an odorsok between your carbon filter and air cooled lights to help keep your lights clean from carbon dust.
| 125mm Inline Odor Sok Box |
| 150mm Inline Odor Sok Box |
| 250mm Inline Odor Sok Box |
Acoustic foil duct is perforated along its entire length with micro perforations to enhance acoustic performance. Using insulated ducting keeps the noise from air movement down and also helps to keep your grow room cooler when used with air cooled lights.
Sold by the meter
| 100mm Insulated Ducting |
| 125mm Insulated Ducting |
| 150mm Insulated Ducting |
| 200mm Insulated Ducting |
| 250mm Insulated Ducting |
Reducers are useful for fitting fans,filters & silencers to other various sized pieces of equipment, for example you would be able to connect an 6 inch ducting to a 10 inch fan or the other way around,It is also usefull if you have a large powerful fan but wish to make a smaller hole in the wall of your building. A reducer will help you do this.
| 125mm to 100mm Reducer |
| 150mm to 100mm Reducer |
| 150mm to 125mm Reducer |
| 200mm to 100mm Reducer |
| 200mm to 125mm Reducer |
| 200mm to 150mm Reducer |
| 250mm to 150mm Reducer |
| 250mm to 200mm Reducer |
| 250mm to 125mm Reducer |
| 315mm to 200mm Reducer |
| 315mm to 250mm Reducer |
| 315mm to 150mm Reducer |
"Y" pieces ensure an even flow when you need to use one fan to draw evenly from two areas.
| 250mm to 125mm Reducer Y Piece |
| 250mm to 150mm Reducer Y Piece |
